Start-Up; Before Start-Up; Configuration Options For Start-Up; Base Settings - Burkert AE3360 Quick Start Manual

9

START-UP

WARNING!
Risk of injury due to improper operation.
Improper operation may result in injuries as well as damage to the
device and the surrounding area.
▶ The operating personnel must know and understand the con-
tents of the Operating Instructions.
▶ The safety instructions must be followed and the device used
only as intended.
▶ Only adequately trained personnel may start up the system/
device.
9.1

Before start-up

WARNING!
Consider for devices requiring disassembly for installation.
If the actuator is disassembled, X.TUNE function must be carried
out again before start-up. See chapter "9.5 Adjustment of position
controller – execute X.TUNE".
36
9.2

Configuration options for start-up

• Configuration with the Bürkert Communicator PC software on
PC or tablet
This type of configuration is possible for all device types and
device variants.
The PC software Bürkert Communicator can be downloaded
free of charge from the Bürkert website.
It requires the USB-büS-Interface set available as an
accessory.
Communication is performed via the device's büS service
interface.
To avoid damage to the device, only use the power supply
unit supplied in the USB-büS-interface set.
• Configuration on display of device (optional)
Only possible on devices with display module.
• Use two capacitive buttons in device to adjust position
control (X.TUNE function)
Only possible on devices without display module.
9.3

Base settings

A start-up wizard that provides step-by-step guidance
through the base settings is available for Bürkert Communi-
cator and the display.
(Configuration area → Position controller or
Process controller → START-UP)
English
Type 3360, 3361
Start-up