Code - Burkert 8630 Operating Instructions Manual

Scale limit for process control with Pt100 (P.CO inp pt100)
C)

CODE

Protection code for your parameters
Factory setting: Code 0000
114
Position of the decimal point for the process setpoint and
actual value (Selectable value: 0..3)
Lower range value for external process setpoint
Assigned to the lower current/voltage value of the
external setpoint signal (this setting is only activated if
P.CO SETP / SETP EXT is selected).
Higher range value for external process setpoint
Assigned to the higher current/voltage value of the
external setpoint signal (this setting is only
activated if P.CO SETP / SETP EXT is selected).
Locking the 3 keys
(all functions protected)
Locking the entering within the configuration menu
(all parameters entered are protected)
Enter the 4 digits code
Change the blinking position
Commute to the next position
Operating instructions no. 800607