General Information; Contact Addresses; Warranty; Information On The Internet - Burkert 2030 Operating Instructions Manual

Type 2030, 2031, 2032, 2033,
Generalinformation
4

GENERAL INFORMATION

4.1

Contact addresses

Germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
Quickstart.
Also on the Internet at country.burkert.com
4.2

Warranty

The warranty is only valid if the device is used as intended in accor-
dance with the specified application conditions.
4.3

Information on the internet

The operating instructions and data sheets for Types 2030, 2031,
2032, 2033 and 2037 can be found on the Internet at:
country.burkert.com
2037
5

SYSTEM DESCRIPTION

5.1

General description

The Types 2030, 2031, 2032, 2033 and 2037 are an externally con-
trolled diaphragm valve with piston drive and diaphragm seal. The valve
is self-draining in the appropriate installation position.
5.2

Intended application area

The diaphragm valve of Type 2030 is designed for the control of
contaminated and aggressive media. The valves of Type 2031,
2032, 2033 and 2037 can be used even for ultra-pure or sterile
media with a higher viscosity. The valves may only control media
which do not attack the body and seal materials (see type label).
Information on the resistance of materials to the media is available
from your Bürkert sales office or on the Internet at:
country.burkert.com → resistApp.
6

TECHNICAL DATA

6.1

Conformity

Type 2030, 2031, 2032, 2033 and 2037 conforms with the EU Direc-
tives according to the EU Declaration of Conformity.
6.2

Standards

The applied standards, which verify conformity with the EU Direc-
tives, can be found on the EU-Type Examination Certificate and / or
the EU Declaration of Conformity.
english
7