Top Control Variants - Burkert 8630 Operating Instructions Manual

Top Control variants

3.3
The Top Control positioner is available in 3 forms, varying in electrical connection and control functions.
• Multipole connection with complete functions (Fig. 3.8)
• Terminal with PG cable glands and terminals with restricted functions (Fig. 3.9)
• QUICKON connection with restricted functions
External setpoint for posi-
tion or process control
4..20 mA
0..20 mA
0..10 V
0..5 V
Process control value
4..20 mA
Frequency
Pt 100
Binary input
24 V DC
Pt 100
Fig. 3.8: Position interface with multipole connections
External setpoint for posi-
tion or process control
4..20 mA
0..20 mA
0..10 V
0..5 V
Process control value
4..20 mA
Frequency
Pt 100
Binärer Eingang
24 V DC
Pt 100
Fig. 3.9: Position interface with cable glands
NOTE
The positioners in the Top Control range posses 3-wires instruments. The 24 V DC power supply is isolated from
the setpoint signal.
80
Positioner
Top Control
(Multipole
connection)
Operating
Positioner
Top Control
(PG cable glands)
Operating
2 binary output
Analogue position feedback
Limit switch 1 + 2
2 binary output
Analogue position feedback
Initiatoren 1 + 2
Advice:
Choose between an analogue
position feedback and two binary
outputs by setting the jumper.
Operating instructions no. 800607