Display indications in AUTOMATIC operating mode:
A)
Process controller not active
The following information from the positioner is possible:
•
Actual position of the valve actuator:
•
Set position of the actuator after scaling
i.e. split range function or characteristic curves modification:
•
Input signal for set position:
•
Internal temperature of the positioner:
By pressing the arrow keys you activate the changing over between the 4 display possibilities (Fig. 6.18).
POS__xxx
CMD__xxx
INP__xxx
TEMP_xx.x
Fig. 6.18: Display, operation structure and operating instructions in AUTOMATIC mode with inactive process controller
Top Control Positioner
AUTOMATIC
operating mode
or
Chance over
of the
Leave the key
display
MANUAL
operating mode
POS__xxx (0..100%)
CMD__xxx (0..100%)
INP__xxx (0..100%)
TEMP_xx.x (in °C)
Configuration
Point of Menu
END
(> 5 s)
No activity
of the
operator
123