Cal.user - Burkert 8630 Operating Instructions Manual

cal.user

Calibration of the actual value display, entries for position and process control setpoint, process value, and K-Factor of
the valve.
A) POSITION CONTROL ACTIVATED
Description see next page
NOTE
The signal values within parenthesis are only available as a display and cannot be modified. The type of
signal as previously selected in the configuration menu is displayed:
CAL Inp: Display of the selection within the INPUT menu
CAL OUT: Display of the selection within the outPUT menu
Top Control Positioner
only activated in case of analogue position indication
end of the calibration
117