BIN-IN
Configuration of the binary input
Output
Configuration of the output signals
Top Control Positioner
Option
Binary input not activated
Unit of the analogue position signal output
(see next page)
Setting the binary output
(see next page)
End of the configuration of the output signals
Selection of the function of the
binary input
Searching of a security
position
Enter the security position
(0..100%)
Type of binary input
normally closed
(0..10 V = 1; 10..30 V = 0)
normally open
(0..10 V = 0; 10..30 V = 1)
End of the binary input
function
115