Installation Of The Position Switches (Option) - Burkert 8630 Operating Instructions Manual

5.3

Installation of the position switches (option)

ATTENTION!
It is necessary to open the Top Control housing to install the position switches.
Disconnect the power supply before opening open the Top Control .
Opening the Top Control :
Remove the screws and possible seals between the cover and the housing.
Twist the cover to the left and remove it.
Installing the position switch:
Mount each position switch at the top over the fixing screws. (Fig. 5.4):
Turn right ensures
adjustment
to the top
Bild 5.4: Setting of the initiators with the setscrews
Top Control Positioner
Turn left ensures
adjustment
to the top
Fixing for upper position switch
Fixing for lower position switch
93