Checking The Scanner Operation - Kyocera TASKalfa 4500i Service Manual

Item No.
U073

Checking the scanner operation

Description
Simulates the scanner operation under the arbitrary conditions.
Purpose
To check the scanner operation. This is also done to check the accumulation of dust on the slit
glass.
Method
1. Press the start key.
2. Select the item to be operated.
Scanner Motor
Home Position
Dust Check
DP Reading
Setting: [Scanner Motor]
1. Select [Scanner Motor].
2. Select the item.
3. Change the setting using the +/- keys.
Display
Zoom
Size
Lamp
Original sizes for each setting in SIZE
5000
4300
5100
10000
8600
7100
6100
4. Press the start key. The setting is set.
5. Select [Execute].
6. Press the start key. Scanning starts under the selected conditions.
7. To stop operation, press the stop key.
Display
Scanner operation
Home position operation
Dust adhesion check operation with lamp on
DP scanning position operation
Magnification
Original size
On and off of the exposure lamp
Setting Paper size
A4
B5
11" x 8
A3
B4
A4R
B5R
Description
Description
Operating conditions
5000
7800
" 10200
1/2
9000
8400
6600
5100
1-3-57
Setting range
25 to 400 %
See below.
0 (off) or 1 (on)
Setting Paper size
A5R
Folio
11" x 17"
11" x 15"
8 " x 14"
1/2
8 " x 11"
1/2
5 " x 8
1/2
2LL/2LJ/2LH
"
1/2