Programmable Output Relay K4, Terminals 12, 13 And 14; Programmable Output Relay K5, Terminals 15, 16 And 17 - ABB PST Installation And Maintenance Manual

Figure 20: Terminals 12, 13, 14
Figure 21: Terminals 15, 16, 17
1. . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 22: Tightening torques and cable sizes
46
AC 1006.9 - 5/03
Chapter 5 - Connection

5:2.2.5 Programmable output relay K4, terminals 12, 13 and 14

The output relay gives a signal depending on the selected function.
Default: Run
See Chapter 7 " Settings and configuration" for programming.
Connect the cables to terminal 12, 13 and 14.

5:2.2.6 Programmable output relay K5, terminals 15, 16 and 17

The output relay gives a signal depending on the selected function.
Default: Top of ramp
See Chapter 7 " Settings and configuration" for programming.
Connect the cables to terminal 15, 16 and 17.
M3
0.5 Nm - 4.3 lb.in
3.5x0.6
0.14 ... 2.5 mm 2
AWG 12 ... 22
0.14 ... 2.5 mm 2
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com