Functional Settings; Start/Stop - ABB PST Installation And Maintenance Manual

Top level
Settings
Figure 23: Functional Settings menu
Settings

Functional settings

Figure 24: Start/Stop group
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration
7:2.4
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings

7:2.4.1 Start/Stop

Start / Stop
Protections
Warnings
Faults
Inputs
Outputs
Fieldbus
Seq. Start
Functional Settings
The Functional setting menu consists of groups with param-
eters arranged by function such as protection, warning, fault,
fieldbus communication etc. This menu should be used if a
more advanced set-up is required. For a detailed description
of each parameter, see Chapter 10 " Functions" .
Enter the Functional settings
Enter the menu by selecting Functional Settings .
To set parameters related to start and stop, enter the Start/
Stop group. The following parameters are available in this
group:
• Setting I
e
• External By-Pass
• Start ramp
• Stop ramp
• Initial voltage
• End voltage
• Step down voltage
• Current limit level
• Kick start
• Kick level
• Kick time
• Start range
• Stop range
To set parameters from Setting I
"Basic Settings".
to Current limit level, see
e
AC 1006.9 - 5/03
73