ABB PST Installation And Maintenance Manual page 78

78
AC 1006.9 - 5/03
Chapter 7 - Settings and configuration
Underload
Activate the protection if required by changing to Yes .
If "Yes" is selected, the following settings will be
available:
Underload level (Underl Lev)
Set the level of the underload protection.
Available only if the protection is selected.
Underload time (Underl Time)
Set the time for the underload protection.
Available only if the protection is selected.
Underload type of operation (Underl Op)
Select what operation should be initiated if the underload
protection is activated:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed.
Ind Only indication will be given.
Press Store to save the selected operation.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com