Programmable Relay Outputs; Update Cycles In The Control Program; Settings; Diagnostics - ABB ACS800 Series Firmware Manual

30

Programmable relay outputs

On the standard I/O board there are three programmable relay outputs. Six outputs
can be added by using the optional Digital I/O Extension Modules. With parameter
setting it is possible to choose which information to indicate through the relay output:
ready, running, fault, warning, motor stall, etc.
It is possible to write a value to a relay output through a serial communication link.

Update cycles in the Control Program

Output
RO / standard
RO / extension

Settings

Parameter
Group
Group

Diagnostics

Actual Value
01.21
01.41
Program features
Cycle
50 ms
50 ms
14 RELAY OUTPUTS
98 OPTION MODULES
Additional Information
Standard relay output states
Optional relays output states
Additional Information
Value selections and operation times
Activation of optional relay outputs