Changed Settings; Reset All Settings - ABB PST Installation And Maintenance Manual

Top level
Settings
Figure 35: Changed Settings menu
Top level
Settings
Figure 36: Reset all Settings menu
96
AC 1006.9 - 5/03
Chapter 7 - Settings and configuration

7:2.7.1 Changed Settings

Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings

Reset all settings

7:2.7.2 Reset all Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
The Changed settings menu consists of all parameters that
have been changed from the factory default setting.
If no parameters have been changed, the LCD will display
No Changed Settings .
To reset all the changed parameters back to factory default
setting, enter this menu.
Confirmation of reset will be displayed as Done on the LCD.
The real time clock, the hour run meter, and the total num-
ber of starts will not be affected by the reset.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com