Frequency Fault, Type Of Operation; Heat Sink Over-Temperature Fault, Type Of Operation - ABB PST Installation And Maintenance Manual

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 10 - Functions

10:46 Frequency fault, type of operation

Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/Freq F Op
This parameter makes it possible to select between two different
actions if the frequency is out of range (frequency fault).
Stop–M
Stop–A
10:47 Heatsink over-temperature fault, type of
operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/HS Temp Op
This parameter makes it possible to select between two different
actions if the heat sink temperature of the softstarter is too high.
Stop– M
Stop– A
The motor stops and a manual reset is
required before restart.
The motor stops and an automatic reset
is performed when the fault disappears.
Parameter Default
text value
Freq F Op Stop-M
The motor stops and a manual reset is
required before restart.
The motor stops and an automatic reset
is performed when the fault disappears.
Parameter Default
text value
HS Temp Op Stop-M
Setting
Description
range
Type of
Stop-M, operation for
Stop-A frequency
fault
Setting
Description
range
Type of
operation for
Stop-M,
heat sink
Stop-A
overtempera-
ture fault
141
AC 1006.9 - 5/03