ABB PST Installation And Maintenance Manual page 110

No Type Parameter
34 Read/Write PTC Op
35 Read/Write Ext ByPass
36 Read/Write BP Fault Op
37 Read/Write Warn I=High
38 Read/Write Wa I=H Lev
39 Read/Write Warn I=Low
40 Read/Write Wa I=L Lev
41 Read/Write Warn OL
42 Read/Write Wa OL Lev
43 Read/Write Warn SCR OL
44 Read/Write Ph Loss Op
45 Read/Write FB Fault Op
46 Read/Write Freq F Op.
47 Read/Write HS Temp Op
48 Read/Write SCR SC Op
49 Read In0
50 Read In1
51 Read/Write Relay K4
52 Read/Write Relay K5
53 Read/Write Relay K6
54 Read/Write SW Outp V7
55 Read/Write Event K4
56 Read/Write Event K5
57 Read/Write Event K6
58 Read/Write Event V7
59 Read Fieldb Ctrl
60 Read Fieldb Type
61 Read Fieldb Addr
110
AC 1006.9 - 5/03
Chapter 8 - Fieldbus communication (option)
Description
Type of operation for PTC protection
External By-pass contactor is used
Type of operation for by-pass monitor
protection
High current warning
Trip level for high current warning
Low current warning
Trip level for low current warning
Overload warning
Trip level for overload warning
SCR overload warning
Type of operation for phase loss fault
Type of operation for fieldbus fault
Type of operation for frequency fault
Type of operation for heat sink over
temperature fault
Type of operation for SCR short circuit
fault
Function of programmable input In0
Function of programmable input In1
Function of programmable relay output
K4
Function of programmable relay output
K5
Function of programmable relay output
K6
Function of programmable software
output V7
Different events to include for
signalling with K4 if "Event" is selected
Different events to include for
signalling with K5 if "Event" is selected
Different events to include for
signalling with K6 if "Event" is selected
Different events to include for
signalling with V7 if "Event" is selected
Control of the softstarter with fieldbus
Type of fieldbus
Fieldbus address
Range
Stop– M, Stop– A, Ind
No, Yes
Stop– M, Stop– A
No, Yes
0.5 – 5.0
No, Yes
0.4 – 1.0
No, Yes
40 – 99
No, Yes
Stop– M, Stop– A
Stop– M, Stop– A
Stop– M, Stop– A
Stop– M, Stop– A
Stop– M, Stop– A
None, Reset, Enable,
Jog, DOL-on, Start2
None, Reset, Enable,
Jog, DOL-on, Start3
Run, TOR, Event
Run, TOR, Event
Run, TOR, Event
Run, TOR, Event
0 – 65535, Bit mask see
separate description.
0 – 65535, Bit mask see
separate description.
0 – 65535, Bit mask see
separate description.
0 – 65535, Bit mask see
separate description.
No, Yes
AS-I, Other
0 – 1000
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Unit
x Ie
x Ie
%