Binary Output Telegram - ABB PST Installation And Maintenance Manual

106
AC 1006.9 - 5/03
Chapter 8 - Fieldbus communication (option)

8:1.3.4 Binary output telegram

From PLC to Softstarter.
Word in Binary
output output Bit
data area byte
0 0 0
1
2
3
4
5
6
7
1 8 (0)
9 (1)
10 (2)
11 (3)
12 (4)
13 (5)
14 (6)
15 (7)
Data
Start (1st par set if
Seq.start)
Stop
Reset Events
Enable
Jog
DOL start
Start2 (2nd par set
Seq.start)
Start3 (3rd par set
Seq.start)
Time synchronisation
Reset active diagnostics
Spare
Spare
Spare
Spare
Spare
Spare
Description
Commence a start when
signal is set. Start1 if
sequence start.
Commence a stop when
signal is negated.
Reset signal for possible
events.
Enable, this bit must be set
for running the motor.
Perform Jog when signal is
set.
Perform DOL start when
signal is set.
Start2 if sequence start.
Start3 if sequence start.
Time synchronisation signal
that is used to synchronise
the local real time clock with
the time given as an analog
input telegram to the
softstarter. If the signal is "1"
and there is a difference
between the times, the local
real time clock is
synchronised.
When set to "1" this will
reset the fieldbus diagnostic
area.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com