Local Control Menu - ABB PST Installation And Maintenance Manual

Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 21: Local control menu
58
AC 1006.9 - 5/03
Chapter 6 - Human-Machine Interface (HMI)
6:2.4
Start / Stop
Jog
DOL Start

Local Control menu

The Local Control menu is used to start or stop the motor
from the keypad. When local control is selected, the
softstarter can only be controlled by the keypad.
The previous type of control is activated when exiting local
control.
Three different selections are possible (see the table below).
Press navigation keys to view different types of local control.
The LOCAL CONTROL menu can not be entered if Se-
quence start is selected.
Once the motor has been started in this menu, it must first
be stopped before you leave the menu. If the motor is
already running when the menu is entered, it is possible to
leave the menu without stopping the motor.
Function Description
To start and stop the motor
Start/stop
with the keypad.
To run the motor as long as
Jog
Jog is pressed.
To start and stop the motor
DOL start
with the built-in by-pass
(PSTB370...PSTB105
contactor. (See Chapter 3
0 only)
for AC3 ratings)
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com