Faults - ABB PST Installation And Maintenance Manual

Settings
Functional settings
Figure 27: Faults group
82
AC 1006.9 - 5/03
Chapter 7 - Settings and configuration

7:2.4.4 Faults

Start / Stop
Protections
Warnings
Faults
Inputs
Outputs
Fieldbus
Seq. Start
Phase loss type of operation (Ph Loss Op)
Select what operation should be initiated if a phase loss fault
occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart.
Press Store to save the selected operation.
Bypass fault type of operation (BP Fault Op)
Select what operation should be initiated if a bypass fault
occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart
Press Store to save the selected operation.
Fieldbus fault type of operation (FB Fault Op)
Select what operation should be initiated if a fieldbus
communication fault occurs:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed and the motor will restart.
Press Store to save the selected operation.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com