ABB PST Installation And Maintenance Manual page 77

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration
Locked Rotor
Activate the protection if required by changing to Yes .
If "Yes" is selected, the following settings will be
available:
Locked rotor level (Lock R Lev)
Set the level of the locked rotor protection.
Available only if the protection is selected.
Locked rotor time (Lock R Time)
Set the time for the locked rotor protection.
Available only if the protection is selected.
Locked rotor type of operation (Lock R Op)
Select what operation should be initiated if the locked rotor
protection is activated:
Stop– M The motor will stop and a manual reset is required.
Stop– A The motor will stop and an automatic reset is
performed.
Ind Only indication will be given.
Press Store to save the selected operation.
77
AC 1006.9 - 5/03