Initial Voltage, First Sequence; Current Limit, First Sequence; Setting Current, First Sequence - ABB PST Installation And Maintenance Manual

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 10 - Functions

10:57 Initial voltage, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./Init Volt1
This parameter makes it possible to set the initial voltage for the first
parameter set.
Parameter
text
Init Volt1

10:58 Current limit, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./Curr Lim1
This parameter makes it possible to set the current limit level for the
first parameter set.
Parameter
text
Curr Lim1

10:59 Setting current, first sequence

Path in menu:
Menu/SETTINGS/Functional Settings/
Seq Start/1st Seq. Param./1st Set Ie
This parameter makes it possible to set the rated motor current for
the first parameter set.
Parameter
text
1st Set Ie
Default Setting
value range
30% 30... 70%
Default Setting
value range
4 x I 2.0... 5.0xI
e
Default Setting
value range
9... 1380A
divided into
Ir 19
overlapping
ranges
Description
First
sequence,
initial voltage
for start
ramp
Description
First
sequence,
e
current limit
Description
First
sequence,
current limit
AC 1006.9 - 5/03
149