ABB PST Installation And Maintenance Manual page 91

Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration
Second sequence parameters (2nd Seq .Param.)
To set parameters related to the second sequence, enter the
2nd Seq. Param. group.
The following parameters can be adjusted:
2nd Set Ie
Setting current.
Start Ramp2 Ramp time for start.
Init Volt2 Initial voltage.
Curr Lim2
Current limit.
Press Store to save the selected parameter.
Third sequence parameters (3rd Seq .Param.)
To set parameters related to the third sequence, enter the
3rd Seq. Param. group.
The following parameters can be adjusted:
3rd Set Ie Setting current.
Start Ramp3 Ramp time for start.
Init Volt3 Initial voltage.
Curr Lim3 Current limit.
Press Store to save the selected parameter.
91
AC 1006.9 - 5/03