Warnings - ABB PST Installation And Maintenance Manual

Settings
Functional settings
Figure 26: Warnings group
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration

7:2.4.3 Warnings

Start / Stop
Protections
Warnings
Faults
Inputs
Outputs
Fieldbus
Seq. Start
To set parameters related to the warnings, enter the Warn-
ings group:
Warning high current (Warn I=High)
Activate the warning function if required by changing to Yes .
Press Store to save the selected operation
Warning high current level (Wa I=H Lev)
Set the level of the high current warning.
Available only if the function is selected.
Press Store to save the selected operation.
Warning low current (Warn I=Low)
Activate the warning function if required by changing to Yes .
Press Store to save the selected operation.
Warning low current level (Wa I=L Lev)
Set the level of the low current warning.
Available only if the function is selected.
Press Store to save the selected operation.
Warning overload (Warn OL)
Activate the warning function if required by changing to Yes .
Press Store to save the selected operation.
Warning overload level (Wa OL Lev)
Set the level of the overload warning.
Available only if the function is selected.
Press Store to save the selected operation.
Warning SCR overload (Warn SCR OL)
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
81
AC 1006.9 - 5/03