Fieldbus Control - ABB PST Installation And Maintenance Manual

146
AC 1006.9 - 5/03
Chapter 10 - Functions

10:52 Fieldbus control

Path in menu:
Menu/SETTINGS/Functional Settings/
Fieldbus/Fieldb Ctrl
If the softstarter is going to be used with fieldbus communication, the
fieldbus interface must be activated before any action can be taken.
Warning!
If the motor is running and the parameter Fieldb Ctrl is changed from
No to Yes, this will stop the motor (fieldbus control overrides the
programmable inputs).
If the motor is not running and the parameter Fieldb Ctrl is changed
from Yes to No, this might start the motor if there is a start signal
present.
Parameter
text
Fieldb Ctrl
Default Setting
value range
No Yes, No
Description
Control of
the
softstarter
with fieldbus
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com