Event Log Menu; Status Information Menu; Reset Events Menu - ABB PST Installation And Maintenance Manual

Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 25: Event log menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 26: Status information menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 27: Reset events menu
60
AC 1006.9 - 5/03
Chapter 6 - Human-Machine Interface (HMI)
6:2.5
6:2.6
6:2.7

Event Log menu

The Event Log menu is used to check the event log in the
softstarter. When entering this menu, the twenty latest
events in the log are presented, in chronological order with
the latest event as No. 1, the second latest as No. 2 etc.
The events are presented with "type of event", date and
time.
Use the navigation keys to view all entries in the event log.

Status Information menu

The Status information menu is used to present various
information.
Use the navigation keys to cycle through the various sub
menus.
Display text Function
Type of connection, In
Connection
Line/Inside Delta.
Frequency Measured frequency.
Phase L1 Phase current L1.
Phase L2 Phase current L2.
Phase L3 Phase current L3.
Run Time Total run time of the motor.
No. Of Starts Run counter
SW Ver. CU Software version CU.
SW Ver. FU Software version FU.
LV Board No Serial No of the LV PCB.
MAC Address Internal addressing.
Phase seq. Phase sequence indication.

Reset Events menu

The Reset Events menu is entered automatically when a
fault has occurred or a protection is activated. It can also be
entered through the main menu.
Use the navigation keys to view all events. Each event can
be reset.
Low Voltage Products & Systems
ABB Inc. • 888-385-1221 • www.abb-control.com