Viewing Version Information - Cisco D9824 Installation And Configuration Manual

Configuring System Settings

Viewing Version Information

From the user interface of the D9824, choose System Settings > Versions. The
Versions page is displayed.
The Current Versions area displays the currently running loaded application
version and the current limit for the Field Programmable Gate Array (FPGA) version
number.
In the Version Controls area, from the SW Version drop-down list, you can choose
a different application version number to load. From the FPGA drop-down list, you
can choose a different FPGA version number to load. The Selected Version window
is displayed. Click Select & Reboot to load the selected application and reboot the
receiver. Click Erase to remove the selected application version. You will be
prompted to continue or not. Click OK to continue the deletion.
Note: You cannot reboot or remove applications during a download or erase.
The Main Board - Firmware Versions area displays the following version
information:
263