Detailed Explanation Of Setting Data - Mitsubishi Electric FX3G SERIES Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
34.2.1

Detailed explanation of setting data

Details on the setting data in the FLDEL instruction are as shown below.
Setting items
S
1
S
2
n
Cautions
• When the file ID "K0 (FIFO file)" or "K-1 (all files)" is specified, it may take approximately 1 minute to delete the files
depending on the number of stored files.
• It is not permitted to use an "RS (FNC 80)/RS2 (FNC 87)"/"IVCK (FNC270) to IVMC (FNC275)" instruction and an
"FLCRT (FNC300) to FLSTRD (FNC305)" instruction for the same port.
744
File ID
K-1(H0FFFF) : The FLDEL instruction deletes all files.
K0 to K63 : The FLDEL instruction deletes a file associated with the specified file ID.
K512(H200) : The FLDEL instruction formats the CompactFlash
When is "K-1 (H0FFFF)" or "K0" to "K63"
S
1
Specify the deletion method.
K0 : The FLDEL instruction deletes the specified file.
K1 : The FLDEL instruction deletes the association between the file name and the file ID
(but does not delete the file itself).
However, when the file ID specified in
regardless of the setting of
S
2
When is "K512 (H200)"
S
1
Specify the format type.
K256(H100) : The FLDEL instruction formats the CompactFlash
Channel number used by the CF-ADP
K1 : ch1
K2 : ch2
34 FX3U-CF-ADP Applied Instructions – FNC300 to FNC305
34.2 FNC 301 – FLDEL / File delete
Description
TM
card.
is "0", the FLDEL instruction deletes the file itself
S
1
TM
card in the FAT16 format.
•
CF card format
Data Type
16-bit binary
16-bit binary
16-bit binary