Appendix A-3-2 Version Check; Appendix A-3-3 Version Upgrade History [Fx 3G ]; Appendix A-3-4 Version Upgrade History [Fx 3U ] - Mitsubishi Electric FX3G SERIES Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Appendix A-3-2 Version check
Special data register D8001 (decimal) contains information for determining the PLC version. Or for the FX
and FX PLCs, the PLC version can be verified in "PLC Status" within the display module.
3UC
PLC type and
Appendix A-3-3 Version upgrade history [FX
Manufacturer's
Version
serial number
Ver. 1.00
(June, 2008)
Ver. 1.10
(October, 2008)
Ver. 1.20
(June, 2009)
Ver. 1.40
(January, 2011)
Appendix A-3-4 Version upgrade history [FX
Manufacturer's
Version
serial number
Ver. 2.20
(May, 2005)
Ver. 2.30
(November, 2005)
Ver. 2.41
(November, 2007)
Ver. 2.61
D8001
2 4
version
PLC type (Example: 24 = FX
86****
First product
• Supports following 15 instructions:
FLT(FNC49),
EADD(FNC120), ESUB(FNC121), EMUL(FNC122), EDIV(FNC123),
ESQR(FNC127),
8X**** IVWR(FNC273)
• Supports connection of FX
• Supports connection of display module (FX
• Supports the floating point operation function.
• Supports the inverter communication function.
• Supports the pulse width/pulse period measurement function.
• Supports connection of following analog special adapters:
96****
- FX -3A-ADP
3U
• Supports the hardware error function of FX
111**** • Supports the following instructions:
IVMC(FNC275)
→ For the manufacturer' serial number check method, refer to Appendix A-3-1.
55**** First product (supporting the functions described as "Ver. 2.20 or later" in this manual)
Corresponds to FX
• Adding the following instructions and function up.
5Y****
- Adding MEP and MEF instructions
- Function up of MUL (FNC 22), DIV (FNC 23), and RS2 (FNC 87) instructions
7Y**** • The baud rate "38400 bps" is supported in the RS and RS2 instructions, inverter
communication and computer link.
• Supports following 6 instructions:
FLCRT(FNC300), FLDEL(FNC301), FLWR(FNC302), FLRD(FNC303),
FLCMD(FNC304), FLSTRD(FNC305)
97**** • Supports connection of following special adapters:
(July, 2009) - FX -3A-ADP
3U
- FX -CF-ADP
3U
• Supports the hardware error function of FX
• Customer keyword / permanent PLC lock is supported.
A Programming Tool Applicability and Version Upgrade History
→ For the operating procedure of the display module,
refer to the Hardware Edition Manual of the PLC to be checked.
1 0 0
Version information (Example: Ver. 1.00)
/FX
2N
]
3G
Contents of version upgrade
VRRD(FNC85), VRSC(FNC86),
INT(FNC129), IVCK(FNC270),
-8AV-BD, FX -2AD-BD, and FX
3G 3G
-5DM).
3G
-4DA-ADP.
3U
]
3U
Contents of version upgrade
PLC Ver. 2.20.
3UC
-4DA-ADP.
3U
A-3 Version Upgrade History
/FX /FX PLC)
2NC 3U 3UC
ECMP(FNC110), EMOV(FNC112),
IVDR(FNC271), IVRD(FNC272),
-1DA-BD.
3G
31
, FX
3G 3U
32
33
34
35
36
37
38
A
B
905