Mitsubishi Electric FX3G SERIES Programming Manual page 895

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
• GX Developer English version (SW D5C-GPPW-E) is applicable to FX
versions.
a) FX PLCs
3G
FX PLC version
3G
Before Ver. 1.10
Ver. 1.10
b) FX PLCs
3U
FX PLC version
3U
Before Ver. 2.30
Before Ver. 2.41
Before Ver. 2.61
Ver. 2.61
c) FX PLCs
3UC
FX PLC version
3UC
Before Ver. 2.20
Before Ver. 2.30
Before Ver. 2.41
Before Ver. 2.53
Before Ver. 2.61
Ver. 2.61
*1. For Ver. 8.24A of GX Developer, the PLC type is FX3UC.
*2. Ver. 8.89T and later versions support the baud rate "38400 bps" in the communication setting for RS
and RS2 instructions, inverter communication and computer link.
3) FX-30P
FX-30P is applicable to FX
a) FX PLCs
3G
FX PLC version
3G
Before Ver. 1.10
Ver. 1.10
b) FX PLCs
3U
FX PLC version
3U
Before Ver. 2.41
Ver. 2.70
c) FX PLCs
3UC
FX
3UC
version
Before Ver. 2.41
Ver. 2.70
Model name
(Media model name
is shown below.)
GX Developer
SW D5C-GPPW-E
Model name
(Media model name
is shown below.)
GX Developer
SW D5C-GPPW-E
Model name
(Media model name
is shown below.)
GX Developer
SW D5C-GPPW-E
, FX and FX
3G 3U
Model name
FX-30P
Model name
FX-30P
PLC
Model name
FX-30P
A Programming Tool Applicability and Version Upgrade History
3G
Applicable GX Developer
version
Ver. 8.72A or later
Ver. 8.78G or later
Applicable GX Developer
version
Ver. 8.24A or later
Ver. 8.29F or later
*2
Ver. 8.29F or later
*2
Ver. 8.82L or later
Applicable GX Developer
version
Ver. 8.18U or later
Ver. 8.24A or later
Ver. 8.29F or later
*2
Ver. 8.29F or later
*2
Ver. 8.68W or later
*2
Ver. 8.82L or later
PLCs starting with the following version:
3UC
Applicable FX-30P version
Ver. 1.00 or later
Applicable FX-30P version
Ver. 1.00 or later
Ver. 1.20 or later
Applicable FX-30P version
Ver. 1.00 or later
Ver. 1.20 or later
A-1 Programming Tool Applicability
/FX /FX PLCs from the following
3U 3UC
Remarks
• Model selection: FX3G
Remarks
*1
• Model selection: FX3U(C)
• Model selection: FX3U(C)
Remarks
• Model selection: FX3U(C)
*1
• Model selection: FX3U(C)
• Model selection: FX3U(C)
Remarks
FX-30P (from first version) supports
FX PLCs (Ver.1.10 or later).
3G
Remarks
Remarks
31
32
33
34
35
36
37
38
A
B
893