Mitsubishi Electric FX3G SERIES Programming Manual page 310

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Caution
Note that "n2" words are shifted when the drive input turns ON in the WSFRP instruction, but that "n2" words are
shifted in each operation cycle in the WSFR instruction.
Error
If the transfer source
Program example
1. Shifting devices with digit specification
X000
FNC 36
WSFRP
X007 X006 X005 X004 X003 X002 X001 X000
[3]
Y017 Y016 Y015 Y014 Y013 Y012 Y011 Y010 Y007 Y006 Y005 Y004 Y003 Y002 Y001 Y000
308
is equivalent to the shifted device
S
n1
S D
K1X000 K1Y000 K 4
Specify the same digit for devices with digit specification.
11 Rotation and Shift Operation – FNC 30 to FNC 39
11.7 FNC 36 – WSFR / Word Shift Right
, an operation error occurs (error code: K6710).
D
n2
K 2
Make sure that the number of digits is
equivalent (Kn
[2]
).
[1]