Mitsubishi Electric FX3G SERIES Programming Manual page 609

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Errors
An operation error is caused in the following cases; The error flag M8067 turns ON, and the error code is stored in
D8067.
• When "n" ("2n" in 32-bit operation) devices starting from
device range (error code: K6706)
• When "n" ("2n" in 32-bit operation) devices starting from
starting from
• When "n" ("2n" in 32-bit operation) devices starting from
starting from
Program example
In the program shown below, the constant "8765" is subtracted from the data stored in D100 to D102 when X010 is set
to ON, and the operation result is stored in D200 and later.
X010
FNC193
b15 b0
D100 K12345
D101 K8701
D102 K3502
D (error code: K6706)
D (error code: K6706)
D100 K8765
BK-P
b15 b0
−
K8765
25 Block Data Operation – FNC190 to FNC199
25.2 NFC193 – BK– / Block Data Subtraction
S , S , and/or
1 2
S overlap "n" ("2n" in 32-bit operation) devices
1
overlap "n" ("2n" in 32-bit operation) devices
S
2
D200 K3
END
b15 b0
D200 K3580
D201 K-64
D202 K-5263
D exceed the corresponding
607
21
22
23
24
25
26
27
28
29
30