Mitsubishi Electric FX3G SERIES Programming Manual page 60

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
3. Click [End] button to finish the setting and close "Special Function Block Settings" dialog box.
4. Set the built-in CC-Link/LT on the "Built-in CC-Link/LT Setup" dialog box.
This item can be set only in the FX
Set item
Baud Rate
Point Mode
No.
Station type
I/O pts
Reserve station select
Up
Down
Insert
Delete
Read Buffer memory
*1. Select 16-point mode when using remote device stations. Remote device stations cannot be set in 4-point
mode.
Only station numbers 40 to 64 are available for remote device stations.
*2. The station numbers 32, 48 and 64 are available when a remote device station is selected in Station type.
5. Click the [OK] button to finish the setup and close the "Built-in CC-Link/LT Setup" dialog box.
58
-32MT-LT-2.
3UC
Contents of setting
Select one of the following supported built-in CC-Link/LT transmission rates:
2.5Mbps
625kbps
156kbps
Select one of the following supported point modes:
16-point mode
4-point mode
This item indicates the station number of the built-in CC-Link/LT module.
Station numbers 1 to 64 are available.
Select one of the following station type:
Remote I/O station (Input)
Remote I/O station (Output)
Remote I/O station (Input/Output)
*1
Remote device station
Select one of the following supported I/O point counts for each remote
I/O and remote device station: 1 to 16, 32, 48, 64
Select whether or not the Built-in CC-Link/LT station is specified as a reserved
station.
This button moves the cursor to the upper line (transposes the upper line).
This button moves the cursor to the lower line (transposes the lower line).
This button inserts a line in the currently selected position.
This button deletes the currently selected line.
Click this button to read the transmission rate, point mode and station
information of the built-in CC-Link/LT module.
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
*2
Setting range
–
–
–
–
*2
1 to 16, 32, 48, 64
–
–
–
–
–
–