Appendix A-2 Peripheral Product Applicability (Except Programming Tools); Appendix A-2-1 Peripheral Product Applicability - Mitsubishi Electric FX3G SERIES Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition

Appendix A-2 Peripheral product applicability (except programming tools)

Appendix A-2-1 Peripheral product applicability
FX PLC
3G
Product Name
GOT1000 Series
F940WGOT
F940GOT,
F940 Handy GOT
F930GOT (-K)
F920GOT (-K)
ET-940
FX-10DM (-SET0)
FX-10DU
*1. The F940GOT and ET-940 whose version is earlier than Ver.1.10 do not support the transparent (2-port)
function of the GX Developer.
902
Applicability
This series is compatible with the FX
used.
GT15 and GT11:
Standard monitor OS[03.14.**]or later
Communication driver MELSEC-FX[03.14.**]or later Option OS List editor for
MELSEC-FX[03.14.**]or later
GT10:
Standard monitor OS[01.10.**]or later
Communication driver MELSEC-FX[01.06.**]or later
Applicable
This series is subject to the following restrictions when connected using unsupported
standard monitor OS, communication driver or option OS.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX
• The list editor function for MELSEC-FX is not available. When using the list editor
function for MELSEC-FX, upgrade the standard monitor OS, communication driver and
option OS to the version compatible with the FX
Check the applicability of other items in the GOT manual.
Not applicable The following restriction applies when connected.
Not applicable
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
Not applicable
and program sizes available in the FX
Not applicable
For connection using the 2-port interface function
Not applicable
The following restriction applies when connected.
Contents of restrictions
Not applicable Programming is enabled only in the function ranges such as instructions, device
ranges and program sizes available in the FX
The following restriction applies when connected.
Contents of restrictions
Not applicable It is limited to the device range and function range supported by the highest class model
(FX or FX
1N
A Programming Tool Applicability and Version Upgrade History
A-2 Peripheral product applicability (except programming tools)
Remarks
PLC when GT Designer2 Ver. 2.85P or later is
3G
1N
1N
→ For applicable models, refer to the GOT manual.
→ For supported models and device ranges, refer to the FX-10DM USER'
) applicable in the product version.
1NC
→ For supported models and device ranges, refer to the FX-10DU
Operation Manual (Manual No. JY992D34701).
and FX PLCs.
1NC
PLC.
3G
and FX PLCs.
1NC
*1
, refer to Appendix A-1-4.
and FX PLCs.
1N 1NC
MANUAL (Manual No. JY992D86401).