Mitsubishi Electric FX3G SERIES Programming Manual page 64

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
8
Setting positioning
The positioning setting function is available in all FX
1. Click "Positioning" tab.
"Positioning" tab is displayed when a check mark is put next to "Positioning" in the "Memory
capacity" tab.
2. Set the positioning constants in TBL (FNC152) instruction.
62
PLCs and FX
3G
→ For TBL (FNC152) instruction, refer to the Positioning Control Manual.
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
/FX PLCs Ver. 2.20 or later.
3U 3UC
This example shows a window in
an FX /FX PLC.
3U 3UC