Chapter 5. Profinet Specifications; Profinet Protocol Support; Technical Data - GE PAC8000 series User Manual

Chapter 5. PROFINET Specifications

Release 2.00 of the PAC8000 PROFINET Scanner supports PROFINET v2.3 Class A
IO-Device with the clarifications listed below. For version-specific updates, refer to the
Important Product Information document provided with your module.

PROFINET Protocol Support

5.1
RTC – Real time Cyclic Protocol: RT_CLASS_1 & RT_CLASS_2
RTA – Real time Acyclic Protocol
DCP – Discovery and Configuration Protocol
CL-RPC – Connectionless Remote Procedure Call
LLDP – Link Layer Discovery Protocol – transmission only
MRP – Client role only (Manager role not supported)
PTCP – Precision Transparent Clock Protocol – Line delay measurement only

Technical Data

5.2
API:
Number of Application Relations
supported:
Number of System Redundancy
Application Relations (SR-AR) sets
supported
Maximum length of cyclic input
data:
Maximum length of output data:
Alarm Types:
DCP:
Identification & Maintenance:
Context Management:
Minimum cycle time:
Ethernet rate:
GFK-2839B
PAC8000* IO PROFINET Scanner User's Manual–September 2017
Single API (0) used.
1 (Additional Supervisor-DA-AR allowed)
1
1440 bytes
1440 bytes
Pull, Plug, PlugWrong
Get/Set/Identify supported. Only All and Name Of
Station filters supported
I&M0 only
by CL-RPC
1ms
100 Mbit/s full duplex with auto-negotiation
Index
47