Loading Setpoints From A File - GE GEK-113045B Manual

4.1 SPMPC SOFTWARE 4 USER INTERFACE

4.1.6 LOADING SETPOINTS FROM A FILE

Loading the SPM with setpoints from a file is accomplished as follows:
1. Select the File > Open menu item
2. SPMPC launches the Open window listing all filenames in the SPM default directory with the extension
SPM. Select the file to download and click OK.
4
Select the File > Send Setpoints to Relay menu item. SPMPC will prompt to confirm or cancel the setpoint file
transfer. Click Yes to download the setpoints to the SPM or click No to cancel.
4- SPM Synchronous Motor Protection and Control GE Multilin
6
Courtesy of store.ips.us