4.A Internal Resistance Compensation; Handset; Rs-232 Communication Port; Circuit Board Coil Driver Modules - GE IC3645SR3R404P2 Installation And Operation Manual

Separately excited (sx) transistorized dual motor controllers
Table of Contents

Advertisement

BASIC OPERATION AND FEATURES
SX TRANSISTOR CONTROL
Section 2.3.4.a Internal Resistance Compensation
This feature is used when the Battery Discharge Indicator
is present. Adjustment of this function optimizes BDI with
among different brands of batteries.
Section 2.3.5 Handset
This is a multi-functional tool used with the LX, ZX, and SX
Series GE solid state controls. The Handset consists of a
Light Emitting Diode (LED) display and a keyboard for data
entry. Note, for ordering purposes, a separate handset part
number is required for SX controls.
Features and functions:
•=
Monitor existing system status codes for both traction
and pump controls. Monitor intermittent random status
codes.
•=
Monitor battery state of charge, if available.
•=
Monitor hourmeter reading on traction and pump
controls.
•=
Monitor or adjust the control functions.
Section 2.3.6 RS232 Communication Port
The serial communication port is used for communication
between the two controllers for the transmission of fault
codes, confirmation of setup parameters and start-up
diagnostics. It can also be used to change control set-up
parameters.
Section 2.3.7 Circuit Board Coil Driver Modules
Coil drivers are internal to the control card, and are the
power devices that operate the Line, 1A and SP contactor
coils. On command from the control card, these drivers
initiate opening and closing the contactor coils. All driver
modules are equipped with reverse battery protection, such
that, if the battery is connected incorrectly, the contactors
can not be closed electrically.
Section 2.3.8 Selectable Truck Modes
Through the adjustment of Function 1 of the controller, the
following truck parameters are automatically adjusted to
the values set below:
Description
Mode 1
Function 1
0 - 63
Setting
Function 48
C/A Rate
of Handset
Function 97
of Computer
FW Start
Function 49
of Handset
Mode 2
Mode 3
64 - 127
128 - 255
Function 53
Function 58
of Handset
of Handset
Function 102
Function 107
of Computer
of Computer
Function 54
Function 59
of Handset
of Handset
Function 98
of Computer
Minimum
Function 50
Field
of Handset
Function 99
of Computer
Ratio
Function 51
of Handset
Function 100
of Computer
Regen
Function 52
Current
of Handset
Function 101
Limit
of Computer
Page 9
Function 103
Function 108
of Computer
of Computer
Function 55
Function 60
of Handset
of Handset
Function 104
Function 109
of Computer
of Computer
Function 56
Function 61
of Handset
of Handset
Function 101
Function 110
of Computer
of Computer
Function 57
Function 62
of Handset
of Handset
Function 106
Function 111
of Computer
of Computer
July 1999

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic3645sr3r404p3

Table of Contents