PS200
PORTABLE GAS MONITOR
ABOUT THIS GUIDE
1. ABOUT THIS GUIDE
This guide instructs gas detection personnel on the features and usage of the PS200 Portable Gas
Monitor (or "the monitor"), including information on operation, configuration, maintenance, specifi-
cations and troubleshooting.
This user guide assumes the reader has a basic knowledge of gas detection procedures.
The user guide is divided into the following topics:
•
2. INTRODUCTION
•
3. OPERATION
•
4. ALARMS
•
5. WARNINGS & FAULTS
•
6. MANUAL BUMP TEST OPTIONS
•
7. RECHARGING THE BATTERIES
•
8. OPERATOR MAINTENANCE
•
9. CALIBRATION
•
10. ACCESSORIES*
•
APPENDIX A. OPERATING PARAMETERS & SENSOR TYPES
•
APPENDIX B. TECHNICAL SUPPORT
1.1. Guide Conventions
The following visual elements are used throughout this guide, where applicable:
WARNING: THIS ICON AND TEXT INDICATE A POTENTIALLY HAZARDOUS
SITUATION, WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR
INJURY.
CAUTION: This icon and text indicate an action or situation, which, if not avoided,
could result in damage to the equipment.
NOTE: This icon and text designates information of special note.
WARNING: READ, UNDERSTAND AND FOLLOW THE ENTIRE CONTENT OF THIS
GUIDE PRIOR TO USE. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
64171, Rev. 11/December 2019
1-1