MCK pbxgateway Administrator's Manual page 98

Configuration
Press the → → → → key to access the parameters
2.
Note: The following parameters must be assigned by the network
administrator.
Press the → → → → key to the Address parameter. Enter the IP Address of the
3.
PBXgateway and press Enter.
Press the ↓ ↓ ↓ ↓ key to the Subnet Mask parameter. Enter the IP Address of
4.
the Subnet Mask and press Enter.
Press the ↓ ↓ ↓ ↓ key to the Default Router parameter. Enter the IP Address
5.
of the Default Router and press Enter.
Press the ← ← ← ← and ↓ ↓ ↓ ↓ key to the Save option.
7.
8. Press Enter to save changes to the active config (.swt) file.
Figure 4.14. Address Menu
Issue 2.1 December 1999
4-37