MCK pbxgateway Administrator's Manual page 89

Configuration
Set User ID continued
Figure 4.9. Port selection screen
Press the → → → → and ↓ ↓ ↓ ↓ key to User ID parameter.
2.
3. Type in the User ID for the port.
Note: It is recommended that the User ID reflect the phone port,
extension, or name of the remote user.
Press the ← ← ← ← key to accept changes and go back to the Configuration
4.
Menu.
Press the ↓ ↓ ↓ ↓ key to the Save parameter.
5.
6. Press Enter to save changes to the active config (.swt) file.
Issue 2.1 December 1999
4-28