File Management & System Upgrades
Using an FTP Connection continued
3.
At the "User" prompt, press Enter.
4.
Enter the Admin Password at the "Password" prompt. Press Enter. (see
Chapter 4, Setting the Administrator's Password)
5.
At the "ftp>" prompt type Binary and press Enter.
6.
At the "ftp>" prompt type Hash and press Enter.
Note: This sets up the format for the file being transferred. All firmware files
(.m6b or .mpb) are stored in binary form.
The following screen appears:
Figure 7.2 FTP login screen
Issue 2.1 December 1999
7-10