MCK pbxgateway Administrator's Manual page 174

Troubleshooting
Baseline Checklist A list of simple checks used as a starting point for
troubleshooting the devices. It covers basic
installation requirements, wiring info and network
information.
Status LEDs
Single and tri-color LEDs, located on the front and
back panels of each unit. The LEDs blink in specific
sequences indicating the unit status during Power-Up
as well as providing status information on the System,
WAN Port and Ethernet (LAN) connections, during
normal operations.
Troubleshooting
A set of procedures providing step-by-step
Procedures
instructions to identify and rectify problems.
Voice Quality
Information on common issues associated with voice
Expectations
compression.
Status Menus
Diagnostic menus providing statistical information on
all 12 phone ports, both WAN ports, Connect stats,
Log and IP stats and general System information.
Remote Phone
A chart listing error messages that are displayed on
Messages
the Remote phones (connected to the Remote unit).
Issue 2.1 December 1999
6-3