MCK pbxgateway Administrator's Manual page 50

PBXgateway Installation
Network Requirements
The PBXgateway must be installed on an existing LAN or WAN network.
Each unit requires a network device which support s a synchronous-serial
"
interface or a Ethernet connection to a TCP/IP network.
The network must be operational and active to complete the installation
"
of the PBXgateway.
The network device must support one of the following:
"
1. Synchronous serial signaling on its data port using an RS-232, V.35,
or RS-530 interface.
Or
2. 10baseT Ethernet connection
Issue 2.1 December 1999
3-7