MCK pbxgateway Administrator's Manual page 127

Configuration
Analog Port continued
Press the → → → → key to enable analog port access for all 12 ports, or press
2.
the ↓ ↓ ↓ ↓ key to set individual ports.
Note: This procedure will set the <Default> setting for all ports.
Press the → → → → key to enable or disable the analog port.
3.
Press the ↓ ↓ ↓ ↓ key to set the numeric "call key" which must be pressed on
4.
the remote phone before placing an analog call.
Note: Key range is 0-15. Do not use a key which already has a function
programmed.
Press the ↓ ↓ ↓ ↓ key to enable (Ring-yes/no) the specific port from receiving
5.
incoming analog calls.
Press the ← ← ← ← key to accept changes and go back to the Configuration
6.
Menu.
Press the ↓ ↓ ↓ ↓ key to the Save option. Press Enter.
7.
Issue 2.1 December 1999
4-66