File Management & System Upgrades
Using a Direct Console Connection continued
5.
Select Transfer-Send Text File command from the ETI program. Locate
the text file to be sent and press Open.
Figure 7.4 Send text file screen
The file upload will begin.
Note: Files labeled ".m6t or .mpt" are text versions of the firmware, where
as ".m6b or .mpb" files are binary files.
The screen will display the Flash activity by a series of dots (.......).
Note: Do not quit the application or stop the file upload until the process is
complete. Once the file is copied to the unit, it is automatically saved as
binary and renamed with a M6B extension.
Issue 2.1 December 1999
7-15