MCK pbxgateway Administrator's Manual page 38

Product Overview
Configuration The configuration, operational, and troubleshooting
and features of the PBXgateway are accessible through the
Management Management Interface (MI). The MI can be accessed with
a PC or terminal connected in one of three ways:
Accessibility
"
"
"
The MI
The MI is a menu system compatible with VT-100
Enhanced Terminal Interface (ETI) enabling the system
administrator:
the capability for full configuration of the phone and
"
WAN ports plus IP configuration.
the access for full management capabilities
"
the access to status information on port usage
"
the information necessary to troubleshoot problems
"
the ability to review and monitor log messages (for
"
possible signs of error)
the ability to perform complete software upgrades.
"
Phone Set
The Phone-Set user interface allows limited access (to the
Interface
MI) including: Console port configuration for serial access
(Remote only)
and IP configuration for Telnet access. (see Appendix C)
The Phone-Set interface is accessible through any phone
(password required) at the Remote site and provides a few
useful diagnostic commands, status displays, and a limited
set of configuration options-TCP/IP, console bit rate, and
connection.
(Refer to Appendix C, Phone-Set Interface for more
information)
Direct Serial connection (see page 4-5).
TCP/IP-based Telnet access (see page 4-7).
Inband login between the Switch and Remote
units. (see page 4-51)
Issue 2.1 December 1999
1-12