MCK pbxgateway Administrator's Manual page 154

The Management Interface (MI)
FTP Parameter Location:
Configuration->IP
Description: Enable/Disable File Transfer Protocol (FTP)
access.
Usage: When FTP is enabled, files can be transferred
to/from the flash file system via the LAN.
Dependencies:
1. IP Address
2. LAN
3. IP Network
See Also: Chapter 7 Uploading Files Using an FTP
Connection
Host Parameter Location:
(Syslog)
Configuration->IP->Syslog
Description: Used to send Syslog messages to a Syslog
Host. Consult with your O/S vendor regarding configuration
information.
Issue 2.1 December 1999
5-23