MCK pbxgateway Administrator's Manual page 262

Appendix C
APPENDIX C: PHONE-SET INTERFACE
Introduction The Phone-Set interface is used for setting limited
configuration parameters for the EXTender 6000 and
EXTender 4000 remote units from a two-wire digital
phone.
Settings include:
Console Data Rate
IP Parameters
Default Route
Press 'Hold' key (on the phone) four times.
How to access
the Phone-Set
interface
The user navigates through the Phone-Set interface using
Menu Legend
the keypad on the phone. The menu legend (Figure C-1,
below) shows each applicable numeric key and the
screen or command that it corresponds to within the
interface.
Prv: Previous Screen
Nxt: Next Screen
Ok: Accept changes
1: Prv
1: Prv
3: Nxt
2:Ok
Figure C-1. Menu Legend
Issue 2.1 December 1999
C-2