MCK pbxgateway Administrator's Manual page 76

Configuration
Synchronous-Serial Device Configuration continued
Optional Configuration
This section of the manual provides information for setting up optional
parameters providing customization, identification and security for the Switch
and Remote units.
To ............ for............
Enable/Disable Managing and isolating the ports for
individual phone troubleshooting purposes.
ports
Set up a Connect Providing a secure WAN connection
Password restricting access to the PBXgateway
from the Remote unit.
Set IP Information Telnet/FTP access to both the
Gateway and Remote units.
Note: The network administrator
must allocate an IP address for each
unit.
Provide a System Identification purposes. (not an IP
Name Host name)
Set the Date/Time Accurate time and date stamps for
troubleshooting and for system
maintenance.
Set an Admin Restricting access to the MI.
Password
Set User ID Map remote users with specific PBX
ports.
Set SNMP Configuring necessary information to
parameters. utilize the Simple Network
Management Protocol functions of
the MI.
Table 4-4. Optional Administrative Items
Refer to......
page 4-23
page 4-25
page 4-36
page 4-42
page 4-47
page 4-49
page 4-27
Appendix D
Issue 2.1 December 1999
4-15