MCK pbxgateway Administrator's Manual page 189

Troubleshooting
Is the active WAN port LED lit solid "Green"?
Yes No
•
If the LED is lit "Yellow", this means that the network device is
connected, but there is no network link to the alternate site.
(Refer to page 6-11 for more information)
•
If the LED is lit "RED" there is no network device connected to
the unit. (Refer to page 6-11 for more information)
•
If the LED is OFF, this means that the WAN port is not enabled.
(Refer to page 6-11 for more information)
Continue with Port Status LEDs on the next page
Note: If you are using your Gateway and Branch in RVP_IP mode, you do
not need your WAN port enabled.
Issue 2.1 December 1999
6-18